How To Change Refresh Rate Windows 7

If your monitor doesn't support a high refresh charge per unit, overclocking tin assistance you increase it slightly. Even so, this totally depends on your display model.

Mostly, gamers are seeking a higher FPS for a better gaming experience. Just if your monitor tin can merely handle a l or sixty Hz refresh charge per unit, you might be disappointed. In such cases, we tin overclock the monitor's refresh charge per unit to some extent.

Then, let'due south swoop into this commodity that will assist you lot sympathise what overclocking is and how you can achieve a higher refresh rate than intended.

Why Should I Overclock My Monitor Refresh Rate?

Although overclocking the monitor tin increase the refresh charge per unit, it tin can reduce your display's lifespan. Withal, this doesn't mean your monitor gets damaged immediately. Here, we take listed some of the advantages of overclocking monitor refresh rate:

• With an increased refresh rate, you tin can feel the smoothness while performing whatever task on your monitor.
• Secondly, gamers will enjoy a higher FPS and better performance on their gaming monitors.
• Moreover, you tin can reuse your former display devices by increasing their refresh rates.
• Indeed, you fifty-fifty save a few bucks as you do not accept to get a new monitor.

How Exercise Y'all Overclock Monitor Refresh Charge per unit?

Overclocking a monitor's refresh rate is possible on both integrated and dedicated GPUs. Simply, yous require some tools to tweak the refresh rate configuration.

In this section, we've covered all the necessary steps to overclock a monitor. Hither, yous will learn to increase the refresh rate via CRU, NVIDIA, and AMD.

Using Custom Resolution Utility

CRU is a tool available for almost all Windows users. However, this utility doesn't support the versions before Windows Vista.

Moreover, you lot demand to have a graphics carte installed on your device. It doesn't matter which card you use – Intel, NVIDIA, or AMD, CRU should work on your monitor.

Before using the tool, you need to download it on your PC. Furthermore, we propose you learn about the rubber mode as some displays may coma while attempting this process.

Now, allow'due south focus on the steps that enable you to overclock monitor refresh rate:

1. Later on y'all install the utility, launch the .exe CRU application from the cipher file.
   
2. Now, make sure you select the active monitor from the drib-down.
3. Under Standard Resolutions, click on the Add button.
   
4. One time the dialogue box opens, choose your display'southward current resolution. Here, we have prepare our monitor'due south resolution to 1920✕1080.
5. So, input a refresh rate five more than the maximum supported refresh rate. For example, if your monitor supports a maximum of 60 Hz, enter 65 and striking Ok. You lot can cheque the maximum refresh rate by navigating to Settings > System > Display > Avant-garde Brandish > Brandish Adapter Backdrop > Monitor > Screen refresh rate.

6. Once again, navigate to Standard Resolutions. Make sure to select the slot y'all but created and click on Ok.
   
7. At present, restart your computer.
8. Adjacent, navigate to the display adapter properties. Nether Monitor, expand the Screen refresh rate drop-down.
   
9. Then, you volition notice a new refresh rate is added. In our case, it's 65. Now, choose this and click on Employ.
   
10. If the refresh rate supports your monitor, your screen goes black for a few seconds. Then, the system asks if you want to keep the changes. So, choose Keep Changes and tap on Ok.
    
11. Your screen shows an fault message if it doesn't back up your monitor. And then, wait for several seconds until the GPU returns to the previous refresh rate.
12. And then, echo the process keeping your refresh rate beneath the ane you set earlier. We recommend increasing information technology by just 1hz.
13. Continue the aforementioned steps until yous reach a point when the monitor stops accepting the refresh rate. That's the maximum your GPU tin overclock your display.

Notation: In some rare cases, your monitor may get stuck for a long time. If you face this issue, attempt rebooting your PC using the power button. Or, y'all could enter the safety mode every bit we discussed earlier.

on NVIDIA Control Panel

If yous have an NVIDIA graphics carte, you lot tin can configure all your GPU settings from its control console. If you're trying to fix your monitor to 144 Hz, we have an article that will help yous.

For now, hither are the steps y'all need to follow to increment the monitor refresh charge per unit on NVIDIA Control Panel:

1. On your desktop screen, right-click and select NVIDIA Control Console.
2. Under Display, go to Change Resolution.
   
3. Then, tap on the Customize push.
   
4. Now, make sure to tick the Enable resolutions not expected by the brandish option.
   
5. Next, choose Create Custom Resolution and have the terms and atmospheric condition.
   
6. Under Display fashion, choose the refresh charge per unit you desire. Well, we recommend using one hertz higher than the maximum hertz supported past your display.
   
7. And so, click on the Test button.
8. Your monitor will go black for a few seconds. If information technology supports the resolution, it asks to keep the change. So, click on Aye.
   
9. Now, navigate to the Change Resolution section. Then select the refresh rate you but added and click on Apply.
   
10. Go on repeating the process until you detect the maximum refresh charge per unit supported by your GUI.
11. Lastly, you can use whatever third-party testing tools that help to confirm whether the refresh charge per unit you set is applied and working.

on AMD Control Center

If y'all have an AMD graphics carte du jour, yous can endeavour overclocking from its in-built software or settings. Here's how yous tin can do merely that:

1. Right-click on the desktop and open up AMD Catalyst Control Eye or Software, whichever is available on your PC.
2. Under Desktop Direction, cull Desktop Properties.
   
3. Navigate to Refresh Rate on the right pane. Hither, input the value one hertz more than the maximum refresh charge per unit supported by your monitor.
   
4. Click on Save to add this new setting.
5. Now, navigate to the display adapter properties on Command Panel and select the refresh rate y'all just added. If it doesn't evidence, you may have to restart your device.
6. Keep repeating the process until your monitor doesn't support the refresh rate.

Conclusion

Well, some monitors' refresh rate increases significantly when you attempt overclocking them. However, the refresh charge per unit of some displays increases by just one or 2 Hz.

Conspicuously, overclocking monitor refresh rate depends on the model you're using. So, nosotros only propose y'all to try it at your ain risk.

Source: https://www.technewstoday.com/how-to-overclock-monitor-refresh-rate/

Posted by: milneribrat1997.blogspot.com

Share this post